Hamilton Beach bread machine

Hamilton Beach 29985MN Cake cycle time

The manual lists the Cake cycle at 1 hr 10 min.

Manual-printed time1 hr 10 minStart to finish, excluding delay-timer and keep-warm time.

Cake cycle details

Delay timerNot allowed
Crust color choiceNo

How it compares

Cake and quick-bread programs mix a batter briefly and then bake. There is no yeast rise, so the delay timer is generally not used.

Compare cake and quick bread times on every sourced bread machine →

When will the bread be ready?

Pick a start time to see when to add mix-ins and when it finishes, or enter when you want it ready to get the start time and the delay-timer setting.

    Uses the manual's printed total time. Room temperature and a cold start can change real-world timing slightly; delay-timer limits come from the manual.

    Timer and manual notes

    The Delay Timer works on Cycles 1, 2, 4 and 9 (Basic, French, Whole Grain and Sweet). Delay plus cycle time can total up to 15 hours.

    Total times from the manual's timetable; they do not include delayed-start time. Crust color does not change the listed time.

    Where these times come from

    Primary source

    Hamilton Beach 29985/29987 Use & Care guide (timetable pp.9–10, controls p.5, how to use p.8, rating p.72) ↗

    Checked October 29, 2026. Times are transcribed from the linked manufacturer manual. Manufacturer page that links this manual ↗ Your machine's display and current manual take priority.

    What to check before pressing Start

    Use 1 hr 10 min as the baseline for this exact 29985MN, then allow for the conditions the machine can actually sense.

    Best fit: This specialty setting follows a different sequence from an everyday bread or wash cycle.
    Check first: Use the recipe or loading limits in the exact manual; the familiar capacity label may not apply to this program.

    The duration comes from useandcares.hamiltonbeach.com; practical planning notes are editorial context and do not replace the manual.

    Compare every 29985MN program · Compare this program across bread machines